Guangdong HIPO lighting Co., LTD.

From January 16 to 18, 2024, the 17th Light + Intelligent Building Middle East was grandly held at the Dubai World Trade Center. The exhibition area of this exhibition has increased by 75% compared with the previous exhibition. 400 well-known enterprises in the field of lighting and intelligent building technology from 30 countries and regions around the world participated.

As an excellent manufacturer of outdoor lighting solutions, HIPO Lighting made a grand appearance with industrial lighting products, demonstrating its independently designed and developed lighting new technologies to global customers, and launching a number of new products as a tool to expand the international market.

HIPO Lighting exhibited two major categories of products: industrial lighting and road lighting, including solar street lights, high bay light, solar floodlights, AC floodlights. With its highly innovative product design and reliable service system, it has attracted many overseas visitors.

In just three days of exhibition time, HIPO Lighting attracted a lot of visitors with novel and unique product appearance, and the booth was crowded with customers inquiring about the products. After understanding the excellent performance and design of the products, many customers expressed their willingness to cooperate.

 01  Smart and energy-saving road lighting

HIPO Lighting has always adhered to independent research and development and innovation from appearance, mechanism, optics and control system, and has successfully launched a series of street light products with ultra-high light efficiency. It exhibited solar streetlight, integrated solar street light, and solar floodlights on site, which were received positive feedback from customers.

S03 | Kestrel 2 Integrated solar street light

• Simple appearance with smooth lines and surface. The surface is not easy to accumulate dust and water, so as to good self-cleaning performance.

• Batteries, controllers, photovoltaic panels, Luminous module are integrated. Easy to install without wiring.

• MPPT charging management ensures that photovoltaic panels charge batteries at maximum power at all times, to maximize light energy conversion.

• MCU control, temperature management, comprehensive protections include overvoltage, undervoltage, overcharge or over discharge, overtemperature protections to effectively extend the service life.

• Take advantage of high efficacy LEDs and redundant light source design, ensure high luminous efficiency, low heat generation and small light depreciation.

• Multiple control methods include automatic mode, microwave sensing control, remote control mode.

• IP66 and IK08 protection. Lengthened and thickened casing with stainless steel 304 connectors, independent double safety ropes, make the application safe and reliable.

• Elbow connector suitable for installation on straight poles and horizontal poles. Lighting fixture is tiltable.

• Built-in level greatly facilitates horizontal adjustment of light fixture.

S02 | Kestrel 2 series solar street light

• Simple appearance with good self-cleaning performance.

• Tempered glass illuminated surface, with high light transmittance and ultraviolet -resistance function, not easy to be yellowing and weathering in contrast with PC cover.

• Structural waterproof design, IP66, IK08, Extended and thickened casing, stainless steel 304 connector,2 independent safety ropes.

• The battery, controller, and LEDs are integrated together, connecting with the photovoltaic panels with a single cable for easier connection.

• High-efficiency LEDs, the effect of whole luminaire up to 180-200lm/W.

• MPPT charging management, always charges the battery at the maximum power.

• MCU control and temperature management system protect the battery from damage caused by overcharge, over voltage, over-discharge, under-voltage, over-temperature, etc.

• Multiple control methods: light-level control, time sequence control, MW control, etc.

• Photovoltaic panels are adjustable 360°horizontally and 52°vertically suitable for use on roads in different latitudes and directions.

• Patented elbow casing connector enable the luminaire to be installed on straight or horizontal poles only by changing direction of the connector. The elevation angle is ±10° adjustable.

• The level and compass on the conjunction base facilitate positioning and angle adjustment of photovoltaic panel.

  
  

 02   New and efficient industrial lighting

HIPO Lighting has been making breakthroughs in the field of industrial lighting, and has successively and successfully launched new types of high-efficiency, energy-saving, long-life, high-color-rendering-index and environmentally friendly products, including industrial and high bay light, floodlights, which can comprehensively satisfy the needs of venues with different lighting requirements.

U03 | LED industrial and mining lamp

• The product has light and thin appearance but high brightness and good heat dissipation. It is easy to install and has wide application range.

• One-piece die-cast aluminum with fin heat dissipation design.

• Redundant light source design ensures high light efficiency, low light depreciation.

• Integrated round PC optical lens ensure high light transmittance efficiency and uniform light output.

• Two installation methods of lifting ring and U-shaped bracket are optional, which are suitable for a variety of installation scenarios.

U02 | Black Panther series industrial and mining lamp

• The product has a light and thin appearance, high brightness, good heat dissipation, quick installation, and wide application range;

• Integrated die-cast aluminum, gill plate heat dissipation design, lightweight lamp body, with better heat dissipation effect; 

• Redundant light source design, multiple high-power LED lamp chips, with high thermal conductivity, low light attenuation, pure light color, and no ghosting;

• On/off, MW microwave induction, PIR infrared induction, multiple control methods, high efficiency and energy saving;

• Integrated circular PC optical lens, with high light transmission efficiency and uniform light output;

• Two installation methods, hanging ring and U-shaped bracket are available, suitable for a variety of installation scenarios.

F02 |  LED floodlight

• The products have seamless front frame, no screws, smooth lines and simple appearance.

• Integrated die-cast shell, anti-corrosion spraying surface, with flow channel heat dissipation, and good heat dissipation effect.

• Using tempered glass, with high light transmittance, anti-UV aging, no deformation, and no yellowing.

• IP65 & IK06.

• Built-in anti-siphon device, it is safe and reliable.

• The bracket can be installed directly by an electric batch, making the installation more convenient and flexible.

• It should be used in outdoor parking lots, courtyards, sports fields, squares, billboards and other indoor or outdoor places.

HIPO Lighting has been plowing into outdoor lighting for more than fifteen years, always focusing on the independent design of products and technology development. Taking advantage of this exhibition's strong display platform, HIPO provided global customers with highly distinctive and cost-effective products. In the future, HIPO Lighting will continue to actively explore the international market, analyze overseas demand, and provide high-quality products to the global lighting industry.